Mountain Gems

Brass

Brass Round Discs

Gauge    Dimensions      Price        $/ 12            

20            1"                      $0.90        $9.00

22            1/2"                   $0.40        $4.00

22            3/4"                   $0.70        $7.00

22            1"                       $0.90       $9.00

22            1 1/4"                  $1.05        $10.50

24            1/2"                    $0.30       $3.00

24            3/4"                   $0.40       $4.00

24            1"                       $0.55       $5.50

24            1 1/4"                  $0.85       $8.50

26            1"                       $0.55       $5.50

26            1 1/4"                  $0.85       $8.50

 

Brass Oval Discs

GaugeDimensions           Price         $/ 12

20         20mm x 38mm      $1.85         $18.50

26         20mm x 15mm       $0.80        $8.00

 

 

Copper Round Discs

Gauge   Dimensions      Price           $/ 12

20             1"                     $1.15            $11.50

22             3/8"                $0.35          $3.50

22             1/2"                 $0.45          $4.50

22             3/4"                $0.85         $8.50

22              1"                   $1.05          $10.50

22              1 1/4"              $1.45          $14.50

24             3/8"                $0.30         $3.00 

24              1/2"                $0.45         $4.50

24             3/4"                $0.65         $6.50

24             1"                    $1.00          $10.00

24              1 1/4"              $1.35          $13.50

 

All prices are subject to change without notice.

  • Minimums:
    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
    • Wire and Tubing: 
      • Less than $10.00/ft: 1 foot minimum
      • $10.00/ft to $25.00/ft: 6" minimum
      • Over $25.00/ft: 3" minimum
  • Additional cuts are subject to 25¢ fee.
  • Wire/Sheet is "Soft Temper" unless otherwise noted.
  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.
  • There is Fine Silver and Sterling Silver Bezel Wire.
  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
    • ~ mm means approximately how thick the metal is in millimetres.
    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns on metals.