Mountain Gems

Brass Wire

Round Brass Wire

Gauge          Quantity      Temper      Price

10                  10 Feet             Soft                

14                  10 Feet             Soft                $12.50

16                  10 Feet             Soft

18                  20 Feet            Soft                $10.30

20                 20 Feet            Soft                $6.25

22                 20 Feet            Soft                $4.50

 

Brass 1/2 Round Wire

Gauge          Quantity      Temper      Price         

14                  20 Feet             Soft               $11.00

18                  20 Feet             Soft

20                20 Feet              Soft              $6.25

24                20 Feet              Soft              $3.00

32                20 Feet              Soft              $4.00

 

Brass Square Wire

Gauge          Quantity      Temper      Price 

18                  20 Feet            Soft                 $13.75

20                 20 Feet            Soft                 $13.25

 

All prices are subject to change without notice.

  • Minimums:
    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
    • Wire and Tubing: 
      • Less than $10.00/ft: 1 foot minimum
      • $10.00/ft to $25.00/ft: 6" minimum
      • Over $25.00/ft: 3" minimum
  • Additional cuts are subject to 25¢ fee.
  • Wire/Sheet is "Soft Temper" unless otherwise noted.
  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.
  • There is Fine Silver and Sterling Silver Bezel Wire.
  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
    • ~ mm means approximately how thick the metal is in millimetres.
    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns on metals.