Mountain Gems

Copper Wire

Round Copper Wire

Gauge          Quantity    Temper    Price

14                  4 oz               Soft           $14.50

16                  4 oz               Soft           $10.50

16                  20 Feet         Soft           $10.50

18                  20 Feet         Soft           $12.50

18                  20 Feet         1/2 Hard    $8.00

20                 4 Oz              Soft           $4.95

20                 4 Oz              1/2 Hard    $5.95

22                 20 Feet         Soft           $3.35

22                 20 Feet         1/2 Hard    $3.35

24                 20 Feet         Soft           $1.95

24                 20 Feet         1/2 Hard    $1.95

 

1/2 Round Copper Wire

Gauge          Quantity    Temper    Price

18                  20 Feet        Soft            $7.50

20                 20 Feet        Soft            $4.25

24                 20 Feet        Soft            $2.25

24                 20 Feet        1/2 Hard     $2.25

 

Square Copper Wire

Gauge          Quantity    Temper    Price

14                  10 Feet         Soft            $16.50

16                  10 Feet         Soft            $10.50

18                  20 Feet        Soft            $14.95

20                 20 Feet        Soft            $9.95

20                 20 Feet        1/2 Hard     $13.50

22                 20 Feet        Soft            $6.25

22                 20 Feet        1/2 Hard     $5.00

 

Pattern Copper Wires

 

All prices are subject to change without notice.

  • Sheet: one side must be 6" ( i.e., 1"x6") to a maximum of 12"x6".
    • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
  • Additional cuts are subject to 25¢ fee.
  • Wire/Sheet is "Soft Temper" unless otherwise noted.
  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
  • There is Fine Silver and Sterling Silver Bezel Wire.
  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
    • ~ mm means approximately how thick the metal is in millimetres.
    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.