Mountain Gems

Fine Silver Bezel Wire

Plain Fine Silver Bezel Wire

Gauge           Height           $/ Foot   

22                  1/8"                 $16.00

28                  1/4"                 $14.00

28                  3/16"               $10.00

28                  1/8"                 $7.50

28                  3/32"              $5.50

 

Scalloped Fine Silver Bezel Wire

Gauge          Height    $/ Foot

28                 3/16"            $10.50  

28                 1/8"              $7.50

 

 

Serrated Fine Silver Bezel Wire

Gauge    Height    $/ Foot

28                 3/16"              $10.50          

28                 1/8"                $7.50

 

PRICING:  Casting grain, Sheet and Round wires: $1.35 per gram; Discs, Square, Triangular, 1/2 Round and Rectangular wires: $1.45per gram.  Each piece purchased is weighed individually. If the combined weight of any "weighable" silver exceeds 75 grams, 10% will be deducted from the total price(wires priced by the foot {not by the gram} are NOT discountable).

 

All prices are subject to change without notice.

  • Minimums:
    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
    • Wire and Tubing: 
      • Less than $10.00/ft: 1 foot minimum
      • $10.00/ft to $25.00/ft: 6" minimum
      • Over $25.00/ft: 3" minimum
  • Additional cuts are subject to 25¢ fee.
  • Wire/Sheet is "Soft Temper" unless otherwise noted.
  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.
  • There is Fine Silver and Sterling Silver Bezel Wire.
  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
    • ~ mm means approximately how thick the metal is in millimetres.
    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.