This small bench block is ideal for jewelers who need a steel work surface but want to take up the bare minimum amount of bench space. Made from case-hardened, polished steel.
4 x 4
Jeweller’s solid rubber block. Great for reducing hammering noise. 4 x 4
Polished round and flat horns with hole in the top for riveting. Used for flattening and shaping.
Small Anvil-4 1/2" tip to tip, 13/16" wide, 1 5/8" high.
Large Anvil- 7 3/4” tip to tip, 1 5/8” wide, 5” high.
Set includes high-grade, hardened steel block with 14 hemi spherical depressions in two rows, graded by 1/16", from 1/8" to 7/8", plus 1" along with 11 matching punches. Block measures 5 1/8" x 2 1/2" x 3/4".
Hardwood block and two punches for shaping lockets, cases, and removing dents. Block measures 2 1/4" on all sides, with shallow depressions of different sizes on each face.
Pepetools Premium Disc Cutter Kit is newly improved version of the worlds best selling disc cutter. Engineered to the industries tightest tolerances, this product is built to last a lifetime. Precision machined from hardened steel, each plate is ground to perfection.
Features exclusive to Pepetools include:
Punch clearing design – Allows the punch to completely clear the die.
Punches with 7° cutting angles – Applies a sheering action that reduces cutting stresses and produces much cleaner cutouts.
Material hold down feature - Restricting the movement of the material being cut, by firmly holding it in-place. The easy open & close height adjusting knob, is low profile - will not interfere with your work, when using mallet, hammer or a hydraulic press.
Organizing base - Machined from aluminum and powder coated to maintain a durable finish. (2016 Models machined in USA from HDPE) Laser engraved for easy punch identification.
Laser Engraved: On disc cutter in MM & IN
Inches: (1/8", 3/16, 1/4", 5/16", 3/8", 7/16", 1/2", 9/16, 5/8", 11/16, 3/4", 13/16, 7/8" & 1")
Metric: (3mm, 4.75mm, 6.35mm, 8mm, 9.5mm, 11mm, 12.7mm, 14.3mm, 16mm, 17mm, 19mm, 20.6mm, 22mm & 25mm)
Limited time only - Pepetools is the only manufacturer who can include these additonal products at no cost
Pepetools premium (95A Durometer) Red Urethane Pad 6"x6" square, 1/16" thick
Center Positioning Dies
1 Year limited warranty
Keeps burs, drills, sawblades, gravers plus many other cutting and abrading tools working smoother and longer. Reduces heat build-up and friction to speed the cut. Easy and convenient to use. Leave it right on the bench and just dip or run the tool through the lubricant at regular intervals while working. Apply a small amount of lubricant to the wire and the opening. Handy 1 oz. push-up container.
Used to make small dent as starting point for drill. Punch is tapped with small hammer. Made of steel with knurled handle for firm gripping surface. Slim design, can also be used as a scriber.