Nickel Silver

Nickel Silver Sheet 6 x 6

Gauge          Price   

16                 $25.35

18                 $19.25

20                $15.45

22                $12.70

24                $9.60


All prices are subject to change without notice.

  • Minimums:
    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
    • Wire and Tubing: 
      • Less than $10.00/ft: 1 foot minimum
      • $10.00/ft to $25.00/ft: 6" minimum
      • Over $25.00/ft: 3" minimum
  • Additional cuts are subject to 25¢ fee.
  • Wire/Sheet is "Soft Temper" unless otherwise noted.
  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.
  • There is Fine Silver and Sterling Silver Bezel Wire.
  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
    • ~ mm means approximately how thick the metal is in millimetres.
    • ~ gms./ or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns on metals.