Sterling Silver

Sheet Solder                 1/2" x 2"         2" x 2"

Hard 1450ºF                     $4.25             $14.95

Medium 1360ºF                $4.25             $14.50

Easy 1325ºF                      $4.25            $14.25

Super Easy 1207ºF           $4.25             $13.95

 

Sterling Silver

Wire Solder                $/ 3 Feet

Hard 1450ºF                  $8.50

Medium 1360ºF             $8.25

Easy 1325ºF                   $8.00

Super Easy 1207ºF        $7.75

 

Sterling SIlver

Paste Solder                $/ 1/2 Troy Oz

Hard 1450ºF                   $30.00

Medium 1360ºF              $29.00

Easy 1325ºF                    $28.00

Super Easy 1207ºF         $25.00

 

Argentium Silver Solder       1/2" x 2"         2" x 2"

Hard 1450ºF                              $3.95             $14.50

Medium 1360ºF                         $3.95             $13.95

Easy 1325ºF                               $3.95             $13.50

 

 

All prices are subject to change without notice.

  • Minimums:

    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".

      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"

    • Wire and Tubing:

      • Less than $10.00/ft: 1 foot minimum

      • $10.00/ft to $25.00/ft: 6" minimum

      • Over $25.00/ft: 3" minimum

  • Additional cuts are subject to 25¢ fee.

  • Wire/Sheet is "Soft Temper" unless otherwise noted.

  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.

  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.

  • There is Fine Silver and Sterling Silver Bezel Wire.

  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.

    • ~ mm means approximately how thick the metal is in millimetres.

    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.

    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.