Double Half Round Wire

PRICING:  Casting grain, Sheet and Round sterling silver wires: $1.45 per gram; Square, Triangular, 1/2 Round and Rectangular sterling silver wires: $1.60 per gram.  Each piece purchased is weighed individually. If the combined weight of any "weighable" silver exceeds 75 grams, 10% will be deducted from the total price(wires priced by the foot {not by the gram} are NOT discountable).

(Note: Price per foot are based on estimates of Price per Gram, listed above)

 

Sterling Silver Double Half Round Wire

Gauge        MM                  $/ Foot

#1                  6.5 x 2               $70.00

#2                 5.1 x 1.3              $35.00

#3                 4 x 1                   $31.50

#4                 3.3 x 0.8            $14.00

 

 

All prices are subject to change without notice.

  • Minimums:

    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".

      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"

    • Wire and Tubing:

      • Less than $10.00/ft: 1 foot minimum

      • $10.00/ft to $25.00/ft: 6" minimum

      • Over $25.00/ft: 3" minimum

  • Additional cuts are subject to 25¢ fee.

  • Wire/Sheet is "Soft Temper" unless otherwise noted.

  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.

  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.

  • There is Fine Silver and Sterling Silver Bezel Wire.

  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.

    • ~ mm means approximately how thick the metal is in millimetres.

    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.

    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.