Sterling Silver 1/2 Round Wire

PRICING:  Casting grain: $1.45/gram, Sheet and Round sterling silver wires: $1.45/gram: Square, 1/2 Round Sterling Silver wires: $1.60/gram; Rectangular, Traingle, and Low Dome 1/2 Round Sterling Silver Wires: $1.60/gram: Pre-Cut Discs: $3.00/gram.  Each piece purchased is weighed individually. If the combined weight of any "weighable" silver exceeds 75 grams, 10% will be deducted from the total price(wires priced by the foot {not by the gram} are NOT discountable).

(Note: Price per foot are based on estimates of Price per Gram, listed above)

 

Sterling Silver 1/2 Round Wire

Gauge          MM          Grams/ Foot         $/Foot

2                   6.54          50.7                        $81.12

4                   5.19           34.5                       $55.20

6                   4.1             20.8                      $33.28

8                   3.25          13.3                        $21.28

9                   2.9            10.1                     $16.16

10                 2.6             8.3                       $13.28

12                 2                5.2                     $8.32

14                 1.6              3.3                     $5.28

16                 1.3              2.1                       $3.36

18                 1                 1.3                       $2.08

20                0.8             0.82                     $1.31

22                0.65           0.56                     $0.90

 

Sterling Silver Square Edge 1/2 Round Wire

Gauge       MM                Grams/ Foot      $/Foot

8                3.25 x 1.65     16.2                     $25.92

 

 

Sterling Silver 1/2 Round 1/2 Hard Wire

Gauge          MM          Grams/ Foot          $/Foot

18                  1                1.3                           $2.08

20                 0.8            0.82                        $1.31

21                  0.71            0.59                       $0.94

22                 0.65          0.56                       $0.90

 

 

All prices are subject to change without notice.

  • Minimums:

    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".

      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"

    • Wire and Tubing:

      • Less than $10.00/ft: 1 foot minimum

      • $10.00/ft to $25.00/ft: 6" minimum

      • Over $25.00/ft: 3" minimum

  • Additional cuts are subject to 25¢ fee.

  • Wire/Sheet is "Soft Temper" unless otherwise noted.

  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.

  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.

  • There is Fine Silver and Sterling Silver Bezel Wire.

  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.

    • ~ mm means approximately how thick the metal is in millimetres.

    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.

    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.