Sterling Silver Rectangle Wire
PRICING: Casting grain: $1.40/gram, Sheet and Round sterling silver wires: $1.45 per gram; Discs, Square, Triangular, 1/2 Round and Rectangular sterling silver wires: $1.55 per gram. Each piece purchased is weighed individually. If the combined weight of any "weighable" silver exceeds 75 grams, 10% will be deducted from the total price(wires priced by the foot {not by the gram} are NOT discountable).
(Note: Price per foot are based on estimates of Price per Gram, listed above)
Sterling Silver Rectangle Wire
Gauge MM Grams/ Foot $/Foot
#4 4 x 1 12.7 $19.69
#4B 4 x 2 25.4 $39.37
#3 4.76 x 1.58 22.5 $34.88
#2-1/2 6 x 2 38.2 $59.21
#2-14 8 x 2 50.2 $77.81
#2 9.54 x 3.18 93.8 $145.39
All prices are subject to change without notice.
- Minimums:
- Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
- Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
- Wire and Tubing:
- Less than $10.00/ft: 1 foot minimum
- $10.00/ft to $25.00/ft: 6" minimum
- Over $25.00/ft: 3" minimum
- Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
- Additional cuts are subject to 25¢ fee.
- Wire/Sheet is "Soft Temper" unless otherwise noted.
- 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
- 16 ga Sterling Sheet is available in 6" pre-cut pieces.
- There is Fine Silver and Sterling Silver Bezel Wire.
- Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
- ~ mm means approximately how thick the metal is in millimetres.
- ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
- ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.
Special Orders:
Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.
There are no returns metals.