Mountain Gems

Sterling Silver Round Tubing

Code      Outside Diameter   Inside Diameter  $/ Foot

SSRT01      1.62                        1.12                        $9.00

SSRT02     1.8                          1.3                         $9.50

SSRT03     2.59                       2.08                     $14.50

SSRT04     4.78                       3.96                      $42.00

SSRT05     6.35                      5.54                      $55.50

SSRT06     9.53                      8.71                       $86.00

SSRT07     12.7                        11.89                     $90.00

SSRT08     2.9                        2.08                     $25.00

SSRT09    2.54                       3.96                     $17.50

SSRT10     2.03                       5.54                     $15.50

SSRT11      3.66                       8.71                       $51.50

SSRT12     4.57                       11.89                     $48.00

SSRT13     5.61                        2.08                     $74.00

SSRT14     6.68                       1.93                      $88.50

SSRT15     2                            1                           $18.00

 

PRICING:  Casting grain, Sheet and Round wires: $1.35 per gram; Discs, Square, Triangular, 1/2 Round and Rectangular wires: $1.45per gram.  Each piece purchased is weighed individually. If the combined weight of any "weighable" silver exceeds 75 grams, 10% will be deducted from the total price(wires priced by the foot {not by the gram} are NOT discountable).

 

All prices are subject to change without notice.

  • Minimums:
    • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
      • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
    • Wire and Tubing: 
      • Less than $10.00/ft: 1 foot minimum
      • $10.00/ft to $25.00/ft: 6" minimum
      • Over $25.00/ft: 3" minimum
  • Additional cuts are subject to 25¢ fee.
  • Wire/Sheet is "Soft Temper" unless otherwise noted.
  • 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
  • 16 ga Sterling Sheet is available in 6" pre-cut pieces.
  • There is Fine Silver and Sterling Silver Bezel Wire.
  • Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
    • ~ mm means approximately how thick the metal is in millimetres.
    • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
    • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.