You have no items in your cart
Argentium Silver Solder
- Hard 1450ºF / 1/2" x 2"
is backordered and will ship as soon as it is back in stock.
All prices are subject to change without notice.
Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".
Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"
Wire and Tubing:
Less than $10.00/ft: 1 foot minimum
$10.00/ft to $25.00/ft: 6" minimum
Over $25.00/ft: 3" minimum
Additional cuts are subject to 25¢ fee.
Wire/Sheet is "Soft Temper" unless otherwise noted.
18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.
16 ga Sterling Sheet is available in 6" pre-cut pieces.
There is Fine Silver and Sterling Silver Bezel Wire.
Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.
~ mm means approximately how thick the metal is in millimetres.
~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.
~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.
Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.
There are no returns metals.