Sterling Silver - Sheet Solder

• Minimums:

  • Sheet: one side must be 6" or 3" ( i.e., 1"x6" or 1"x3") to a maximum of 12"x6".

    • Exception: Reticulation silver: one side must be 3" (i.e., 1"x3") to a maximum of 12"x3"

  • Wire and Tubing:

    • Less than $10.00/ft: 1 foot minimum

    • $10.00/ft to $25.00/ft: 6" minimum

    • Over $25.00/ft: 3" minimum

• Additional cuts are subject to 25¢ fee.

• Wire/Sheet is "Soft Temper" unless otherwise noted.

• 18 & 20 ga Sterling Sheet are available in 8" pre-cut pieces.

• 16 ga Sterling Sheet is available in 6" pre-cut pieces.

• There is Fine Silver and Sterling Silver Bezel Wire.

• Most of our metals are sold by weight. Some of our prices shown are estimates and should be used as guidelines only.

  • ~ mm means approximately how thick the metal is in millimetres.

  • ~ gms./sq.in or ~gms./ft. means 'approximate grams per square inch' or 'approximate grams per foot'.

  • ~ $/ft. or ~$/sq" means approximate dollars per foot' or 'approximate dollars per square inch'.

Special Orders:

Special orders are subject to our supplier’s minimum. Special orders must be prepaid at a rate estimated to be 50% of the price.

There are no returns metals.